info[at]tellostec.de
230 Vac operator with remote release and handle, reduction ratio 1/40 | Maximum safety even in the quick release phase thanks to a microswitch that disconnects the motor supply voltage | Reductions in oil bath with hardened steel screw and bronze gears for maximum performance, maximum reliability and smooth running | 4 limit switches with micrometric adjustment
Technical data
| Mains supply | 230 Vac (50-60Hz) |
| Supply voltage motor | 230 Vac |
| Max. Power consumption | 1,5 A |
| Max. Torque | 135 Nm |
| Max. Turns at the exit | 38 |
| Output speed | 48 r.p.m. |
| Hole shaft output | 1″ (25.4 mm) |
| Reduction ratio Limit switch | 1/40 |
| ED | 40% |
| Protection class | IP40 |
| Integrated control | Nope |
| Integrated receiver | Nope |
| Encoder | Nope |
| Operating temperature | -20°C /+50°C |
| Lubrication | OIL |
| Max. Door weight | 800 kg |
| Weight | 15.3 kg |
| Quantity per pallet | 32 |
Controls
CELL.P
APPLICATION
1 Operator for industrial sliding gates, folding gates and roller grilles
SUPPLY OF THE CONTROL UNIT
230 Vac – 50/60 Hz
SUPPLY OF THE MOTOR
230 Vac / 1000 W
MAIN FUNCTIONS
Setting of parameters and operating logic with trimmers and dip switches | Integrated 433.92 MHz radio receiver with 64 codes and 3 radio codes (advanced rolling code, rolling code, fixed code) | Removable terminal strips | Automatic and semi-automatic operating logic and dead man function | Inputs for motor limit switch | Input for N.C. or 8K2 safety contact strip or photocell | Inputs for opening buttons, programmable for step operation and closing | Output for “Door open” indicator light | Output for flashing light connection | Electronic adjustment of motor torque (5 levels) | Management of hand-held transmitters stored in the integrated receiver possible via Advantouch system
START
APPLICATION
1 operator for sectional and roller doors, folding doors with more than two leaves, unbalanced and industrial roller grilles
SUPPLY OF THE CONTROL UNIT
230 Vac single-phase or 400 Vac three-phase
SUPPLY OF THE MOTOR
230 Vac / 900 W or 400 Vac / 2200 W
MAIN FUNCTIONS
Only for dead man’s function | Fixed terminal strips | Inputs for motor limit switch | Inputs for opening, closing and stop | Buttons for opening and closing integrated in the control unit | Output for blinker light and additional capacitor for higher motor starting torque
THINKY
APPLICATION
1 operator for sectional and roller doors, folding doors with more than two leaves, unbalanced and industrial roller grilles
SUPPLY OF THE CONTROL UNIT
230 Vac single-phase or 400 Vac three-phase
SUPPLY OF THE MOTOR
230 Vac / 800 W or 400 Vac / 2200 W
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz radio receiver with 64 codes and ARC radio coding as well as preparation for radio receiver connection via plug connector | Preparation for connection of an absolute encoder and quick wiring (VN “ESW” motors) | Autoset function parameters for motors with absolute encoder (VN “ESW”) | Removable terminal strips | Automatic function logic, semi-automatic and with dead man function | Inputs for motor limit switches | Inputs for opening, closing, step operation, pedestrian door and stop | Inputs for 4 pairs of photocells (activation can be set for both opening and closing or only for closing) and PHOTO TEST logic | Input for N.C. or 8K2 safety contact strip | Input for safety sensor | Configurable output for “gate open” indicator light, second radio channel, auxiliary light and area light | Configurable output for “gate open” indicator light or photocell test | Output for flashing light connection | Phase failure and overcurrent protection | Management of parameters stored in the electronic control unit possible via Advantouch system | Number of movements | Access password for programming | Maintenance message
Technical diagram
Reviews
There are no reviews yet.