24 Vdc | Intensive operation
24 Vdc drive for intensive use with integrated control unit and encoder | Standby consumption in accordance with European Regulation (EU) 2023/826 | 230 Vac switching power supply for low power consumption and long operator life | The encoder device offers maximum safety and precision in gate movement | The STC system allows the torque output to be managed according to the gate position, guaranteeing maximum safety | Maximum power and speed (12 m/min) | It is possible to set the opening speed, independent of the closing speed | The operator is equipped with integrated LED courtesy lights | Operation guaranteed even in the event of a power failure thanks to batteries (2 x 1.2Ah) that can be perfectly integrated into the motor | Anti-crushing system with power cut-off | Adjustable stroke thanks to 1 mechanical stop supplied in the rail with belt and 2 mechanical stops supplied in the rail with chain | Quick coupling system of the connecting arm of the sliding shoe to the gate | Designed for the connection of the X.BE accessories for the integration of KNX home automation systems and for programming via the BeUP app and the PRO.UP interface
Delivery without rail
Controls
CP.J3-SW
APPLICATION
1 JM.3 operator for sectional doors and up-and-over doors
SUPPLY OF THE CONTROL UNIT
230 Vac – 50/60 Hz
SUPPLY OF THE MOTOR
24 Vdc / 8 A
MAIN FUNCTIONS
Setting of parameters and operating logic with trimmers, dip switches and buttons | Integrated radio receiver 433.92 MHz 64 MHz 4 codes and ARC radio coding | Fixed terminal blocks | Function logic automatic, semi-automatic and with dead man function | Inputs for stepper operation, stop, LED auxiliary light | Output for flashing light connection | Autoset operating parameters | Electronic torque adjustment with automatic calculation for each travel (STC SYSTEM) | Separate electronic speed adjustment for opening and closing | Crush protection with force cut-off and encoder management | Electronic adjustment (4 levels) of the residual belt tension at the end of the movement | Adjustable deceleration | Integrated ESA+ for energy saving | Possibility of parameter configuration and handheld transmitters via Advantouchsystem | Prepared for connection to the battery charger SW.CB (optional)| Prepared for connection to KNX via the X.BE board (optional) | The use of the pro.UP accessory and the BeUP app enables access to an advanced programming level, querying the number of maneuvers and password protection of the control unit as well as diagnostics and firmware update functions | Standby consumption in accordance with European Regulation (EU) 2023/826
info[at]tellostec.de
Reviews
There are no reviews yet.