24 Vdc | Intensive operation
24 Vdc drive for intensive use with integrated control unit and virtual encoder | Standby consumption in accordance with European Regulation (EU) 2023/826 | 115/230 Vac switching power supply for low power consumption and long life of the operator | Control unit with trimmer and dip-switch | Thanks to the virtual encoder, it is possible to optimally manage the decelerations, follow their progression (STC system) and manage the torque output according to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power failure thanks to batteries (2 x 1.2Ah) that can be perfectly integrated into the motor | Anti-crushing system with power cut-off | Designed for the connection of the X.BE accessories for the integration of KNX home automation systems and for programming via the BeUP app and the PRO.UP interface
Including reinforced foundation template. Dimensions 326×164.5×2 mm, center distance of the motor 301×75 mm, no. 4 holes Ø 8.5 mm
Drive sets
1X BULL424SW
24 Vdc drive for intensive use with integrated control unit and virtual encoder
1X PUPILLA.T
Pair of photocells can be aligned in three positions, power supply 14÷30 Vac / 12÷30 Vdc | Close mounting of 2 pairs is possible without synchronization
1X LAMPY
Flashing light 12 ÷ 255 Vac / 14 ÷ 255 Vdc with integrated antenna
1X TO.GO2VA
Hand-held transmitter with 2 channels, 433.92 MHz, with Advanced Rolling Code and Rolling Code
Controls
CP.B24-SW
APPLICATION
1 operator for BULL SW series sliding gate operators
SUPPLY OF THE CONTROL UNIT
230 Vac – 50/60 Hz
SUPPLY OF THE MOTOR
24 Vdc / 8 A
MAIN FUNCTIONS
Setting of parameters and operating logic via trimmers, dip switches and buttons | Built-in 433.92 MHz radio receiver with 64 codes and ARC radio coding | Fixed terminal strips | Automatic, semi-automatic and deadman operating logic | Inputs for motor limit switches | Inputs for step operation, stop, light barrier | Light barrier input active for opening and closing as well as programmable only for closing | Stop input can be set as pedestrian | Output configurable as gate open warning light or second radio channel | Autoset operating parameters | Electronic torque regulation with automatic calculation for each travel path (STC SYSTEM) | Separate electronic adjustment of opening and closing speeds and closing speeds | Crush protection with force cut-off | Virtual encoder | Adjustable decelerations | Integrated ESA+ for energy saving | Possibility of configuring parameters and managing hand-held transmitters with Advantouch system | Connection option for SW.CB battery charger (optional) | Prepared for KNX connection via X.BE board (optional) | Using the pro.UP accessory and the BeUP app allows access to an advanced programming level, querying the number of maneuvers and protecting the control unit with a password, as well as providing diagnostics and firmware update functions | Standby consumption in accordance with European Regulation (EU) 2023/826
info[at]tellostec.de
Reviews
There are no reviews yet.