24 Vdc | Intensive operation
24 Vdc self-locking electromechanical operator with encoder for intensive use | The TRUST24 control unit ensures a stand-by power consumption of < 0.8 W | The encoder offers maximum safety and precision during door movement | Crush protection with force cut-off | Operation also possible with battery | Reliable drive and smooth running | Reliable and innovative geared motor with 2 adjustable mechanical stops for opening and closing, accessible from above and located under the metal cover of the rod | . Ideal for automating all types of swing gates thanks to the small footprint (only 96 mm wide) and the screw-on mounting brackets | The 45° inclination of the cable reduces the floor clearance to a minimum. The rear and front brackets aligned on the same axis allow better load distribution, optimizing the service life of the actuator | Suitable for dusty or sandy places and places exposed to aggressive weather conditions thanks to the spindle protected by a scraper ring and a stainless steel rod | Unlocking from above with easy access
Drive sets
2x TOM3024E
24 Vdc self-locking electromechanical drive with encoder for intensive use
1X TRUST24
24 Vdc control unit with integrated receiver and battery charger
1X PUPILLA.T
Pair of photocells can be aligned in three positions, power supply 14÷30 Vac / 12÷30 Vdc | Close mounting of 2 pairs is possible without synchronization
1X LAMPY
Flashing light 12 ÷ 255 Vac / 14 ÷ 255 Vdc with integrated antenna
1X TO.GO2VA
Hand-held transmitter with 2 channels, 433.92 MHz, with Advanced Rolling Code and Rolling Code
Controls
BRAINY24
APPLICATION
1 or 2 operators for swing gates, opposing sliding gates and industrial folding gates with a maximum of 2 leaves
SUPPLY OF THE CONTROL UNIT
230 Vac – 50/60 Hz
SUPPLY OF THE MOTOR
24 Vdc / 120 W + 120 W
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz radio receiver with 64 codes and 3 radio codings (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal strips | Inputs for limit switches (separately for each motor) | Inputs for opening, closing and pedestrian door | Inputs for photocell activation on opening-closing and only on closing | Input for safety contact strip N.C. or 8K2 | Output for 12 Vdc electric lock | Output for “gate open” or photocell test indicator light, for second radio channel and photocell test | Output for flashing light connection | Autoset operating parameters | Electronic torque adjustment (separate for each motor) | Anti-crushing protection with force cut-off | Electronic slowdowns on opening and closing (separate for each motor) | Possibility of parameter configuration and remote control management via the Advantouch system | Number of movements | Access password for programming | Maintenance message
BRAINY24 PLUS
APPLICATION
1 or 2 operators for swing gates, opposing sliding gates and industrial folding gates with a maximum of 2 leaves
SUPPLY OF THE CONTROL UNIT
115 or 230 Vac (selectable) 50/60Hz
SUPPLY OF THE MOTOR
24 Vdc / 240 W + 240 W
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz radio receiver 64 codes and 3 codings (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal blocks | Separate limit switch inputs for each motor | Inputs for open, close, step and pedestrian | Separate inputs for photocell for open-close and close only | Stop input | Input for N.C. or 8K2 safety contact strip | Input for hydraulic motor encoder 24 Vdc | Output for 12 Vdc electric lock | 2 outputs configurable as warning light for open door, second radio channel, auxiliary light, zone light or light barrier test, flashing light, alarm for open door, Alarm NC inputs | Output for connection of flashing light | Autoset of operating parameters | Separate electronic torque setting for each motor | Separate electronic speed control for each motor | Crush protection with force cut-off and encoder management | Opening and closing slowdowns separately for each motor | Prepared for connection to KNX via X.BE (optional) | Prepared for control, configuration, diagnostics and firmware update via the BeUP app, via the PRO.UP accessory | Possibility of parameter configuration and management of hand-held transmitters with the Advantouch system | Number of maneuvers | Access password for programming | Maintenance message | Integrated battery charger
TRUST24
APPLICATION
1 to 2 operators for swing gates
SUPPLY OF THE CONTROL UNIT
100 ÷ 250 Vac – 50/60 Hz
SUPPLY OF THE MOTOR
24 Vdc / 130 W + 130 W
MAIN FUNCTIONS
Built-in LCD display | Built-in 433.92 MHz radio receiver with 512 codes and ARC radio coding | Removable terminal blocks | Separate limit switch inputs for each motor | Automatic, semi-automatic and dead man operating logic | Separate encoder inputs for each motor | Inputs for open, close, step, pedestrian and stop | Input for photocells active on open-close and photocells active on close only | Input for safety contact strip N.C. or 8K2 | Output for 12/24 Vdc electric lock | Two outputs configurable as indicator light for open door, auxiliary light, zone light, second radio channel, light barrier test, flashing light | Autoset of operating parameters | Separate electronic torque adjustment for each motor | Crush protection with force cut-off and encoder management | Electronic torque adjustment with automatic calculation for each travel point (STC SYSTEM) | Separately adjustable decelerations for each motor | Possibility of encoder or timed operation (managed via virtual encoder) also independently between the two motors | Integrated ESA+ for energy saving | Prepared for KNX connection via X.BE (optional) | Prepared for control, configuration, diagnostics and firmware update via the BeUP app, via the PRO.UP accessory | Possibility of configuring parameters and managing handheld transmitters with the Advantouch system | Number of maneuvers | Access and programming password | Maintenance message | Integrated battery charger | Standby consumption in accordance with European Regulation (EU) 2023/826
info[at]tellostec.de
Reviews
There are no reviews yet.